Avaya 7004.1 問題集

質問 1：
Click the Exhibit button.

You are adding ten digital telephones as required by a customer work order. The customer wants the user to see the calling or called name associated with the number dialed.
Which Customer Level feature from the list shown in the exhibit, must first be provisioned before you can enter names in at the station level?
A. Call Party Name Display
B. Feature Options
C. Call Redirection
D. Listed Directory Number
正解：A

質問 2：
Given the following network characteristics:
three Communication Server 1000 RIs. 7 x systems IP Peer Networking required DN uniqueness cannot be maintained route calls using site Location Codes (LOCs)
Which type of dialing plan is recommended for this call routing scenario?
A. Network Attendant Numbering Plan
B. Coordinated Dialing Plan (CDP)
C. Flexible Numbering Plan (FNP)
D. Uniform Dialing Plan (UDP)
正解：C

質問 3：
Your customer has a Communication Server 1000 RIs. 7 x system equipped with System Errors and Events Lookup pack 245 that provides the ability to display system messages on screen.
When a system message in received, which procedure should you use to look it up and display it on the screen?
A. Enter errcde followed by the system error code and <cr>. For example, errcde bug4080<cr>
B. Enter err followed by the system error code followed by <cr>. For example, err bug4080<cr>
C. Enter bug followed by the system error code and <cr>. For example, bugerr4080<cr>
D. Enter the system error number followed by <cr> For example, bug4080<cr>
正解：C
解説: (Topexam メンバーにのみ表示されます)

質問 4：
Click the Exhibit button.

A customer has asked if the Communication Server 1000 RIs. 7 x system can route anyone that dial an unassigned number in the customer's DID range to the Attendant.
In reviewing the current configuration as shown in the exhibit, what do you conclude?
(Choose two)
A. only internal station users are routing to the Attendant
B. internal station users and non tie line users are routing to the Attendant
C. NET_DATA Attendant and tie trunk users are receiving an overflow tone
D. all caller types are receiving an overflow tone
正解：B

質問 5：
When attempting to program Zone Based Dialing through Element Manager, the user is unable to access the Dialing Configuration Page.
What needs to be configured before the Dialing Configuration Page can be accessed, assuming the ZBN_PACKAGE (420) is already installed?
A. The CDP dialing plan needs to be programmed.
B. Nothing, Zone Based Dialing cannot be configured in Element Manger.
C. The ZBN_PACKAGE (420) needs to be disabled.
D. Number Zones need to be configured
正解：D

質問 6：
A customer site has a Communication Server 1000 system located at us main campus and wants to network me system for direct calls with a system in a different city.
Which type of steering code is required to route calls over specify trunk routes between the two sites?
A. Distant Steering Code (DSC)
B. Network Plan Area (NPA)
C. Special Number (SPN)
D. Remote Steering Code (RSC)
正解：A

質問 7：
With Automatic On-Net to Off-Net Overflow, if all on-net facilities such as TIE trunks between locations are busy, NARS can convert a dialed UDP number to a Listed Directory Number of the applicable DID number at that location and use off-net facilities, such as CO trunks, to complete the call. When provisioning Automatic On-Net to Off-Net Overflow, which parameter is not correct?
A. Multiple ranges of DNs within each NXX per Location Code can he defined.
B. Only one Listed Directory Number can be defined per Location Code (LOC).
C. Multiple NPAs per Location Code are allowed.
D. Multiple NXX codes per Location Code can be defined.
正解：A