質問 1:Sunil is designing a portal cluster for production. He is using a 32-bit version of IBM WebSphere Portal server and has several multiprocessor servers with 16 GB of memory. What type of cluster configuration should he use?
A. A multi-production cluster because it meets both high-availability and high-performance criteria.
B. A combination of vertical and horizontal clusters to gain the benefits of both configuration types.
C. A vertical cluster, because it ensures minimal latency between cluster members.
D. A horizontal cluster, because it provides fault tolerance.
正解:B
質問 2:Which of the following statements about setting wires on an IBM WebSphere Portal page is correct?
A. Wires can be either public (available to all users) or private (available to a single user).
B. A page can have source and target portlets wires configured automatically.
C. Wires can be created between a source JSR 168 portlet and a target legacy IBM API portlet.
D. A wire can only be created from one portlet to another portlet on the same page.
正解:A
質問 3:What parameters need to be modified in the Installation Manager response file to change the default port numbers during a silent installation?
A. '/> and '/>
B. IBM WebSphere Portal always scans for active ports at 10000 and ends at 65000 during installation. This behavior cannot be affected using command parameters.
C. -W portBlockInput.startingPortToScan=port number -W portBlockInput.endingPortToScan=port number -W portBlockInput.portBlockSize=block size
D. and
正解:D
質問 4:
Jeremy has connected his IBM WebSphere Portal instance to an IBM Tivoli Directory Server repository for authentication purposes. However, while the majority of users are able to authenticate, certain users are not. Jeremy confirmed that the users are attempting to authenticate with the correct user ID and password. What is the most likely cause of this issue?
A. The users should log in with an email address instead of a user ID.
B. The accounts are not members of the All Authenticated Portal Users group.
C. The LDAP bind password is configured incorrectly.
D. The location of the accounts in the LDAP tree is outside the scope of where WebSphere Portal looks for accounts.
正解:D
質問 5:
On the WSRP producer side, the enforcement of the access control decision for provided portlets can be enabled or suppressed by setting the configuration property in which of the following?
A. portal.security.wsrp
B. puma.security.config
C. wmmur.security.config
D. wsrp.security.enabled
正解:D
質問 6:
At a high level, which of the following options best describes the sequence of steps that one should take when setting up an IBM WebSphere Portal static cluster?
A. 1.Install WebSphere Portal on the first node, configure the database, and use the ConfigEngine tasks to create a profile template.
2.Prepare the first node to communicate WebSphere Application Server Network Deployment, and use addNode and ConfigEngine tasks to configure the cluster and user registry.
3.Install WebSphere Portal on additional nodes and use the profile template to configure.
4.Use the addNode and ConfigEngine tasks to federate the additional nodes and complete the cluster setup.
B. 1.Install and configure WebSphere Portal as a stand-alone node for each cluster node.
2.Federate each portal server node to the WebSphere Application Server Network Deployment cell using the addNode command.
3.Create a portal cluster using the ConfigEngine tasks.
4.Configure the cluster members to use the same database and user registry.
C. 1.Use WebSphere Application Server Network Deployment to create a cell and managed node for each portal node in the cluster.
2.Use the WebSphere Portal cluster profile template to install WebSphere Portal onto each node.
3.Use the ConfigEngine tasks to configure the nodes to use the same database and user registy.
4.Federate each of these nodes into the cluster by using the addNode and ConfigEngine tasks.
D. 1.Use WebSphere Application Server Network Deployment to create a managed node for each portal node in the cluster.
2.Federate each of these nodes into the WebSphere Application Server Network Deployment cell using the addNode command.
3.Install and configure WebSphere Portal on each portal server node.
4.Use ConfigEngine tasks to configure the database, user registry, and create the cluster.
正解:A
弊社は失敗したら全額で返金することを承諾します
我々は弊社のC2210-923問題集に自信を持っていますから、試験に失敗したら返金する承諾をします。我々のIBM C2210-923を利用して君は試験に合格できると信じています。もし試験に失敗したら、我々は君の支払ったお金を君に全額で返して、君の試験の失敗する経済損失を減少します。
弊社は無料IBM C2210-923サンプルを提供します
お客様は問題集を購入する時、問題集の質量を心配するかもしれませんが、我々はこのことを解決するために、お客様に無料C2210-923サンプルを提供いたします。そうすると、お客様は購入する前にサンプルをダウンロードしてやってみることができます。君はこのC2210-923問題集は自分に適するかどうか判断して購入を決めることができます。
C2210-923試験ツール:あなたの訓練に便利をもたらすために、あなたは自分のペースによって複数のパソコンで設置できます。
一年間の無料更新サービスを提供します
君が弊社のIBM C2210-923をご購入になってから、我々の承諾する一年間の更新サービスが無料で得られています。弊社の専門家たちは毎日更新状態を検査していますから、この一年間、更新されたら、弊社は更新されたIBM C2210-923をお客様のメールアドレスにお送りいたします。だから、お客様はいつもタイムリーに更新の通知を受けることができます。我々は購入した一年間でお客様がずっと最新版のIBM C2210-923を持っていることを保証します。
安全的な支払方式を利用しています
Credit Cardは今まで全世界の一番安全の支払方式です。少数の手続きの費用かかる必要がありますとはいえ、保障があります。お客様の利益を保障するために、弊社のC2210-923問題集は全部Credit Cardで支払われることができます。
領収書について:社名入りの領収書が必要な場合、メールで社名に記入していただき送信してください。弊社はPDF版の領収書を提供いたします。
弊社のIBM C2210-923を利用すれば試験に合格できます
弊社のIBM C2210-923は専門家たちが長年の経験を通して最新のシラバスに従って研究し出した勉強資料です。弊社はC2210-923問題集の質問と答えが間違いないのを保証いたします。
この問題集は過去のデータから分析して作成されて、カバー率が高くて、受験者としてのあなたを助けて時間とお金を節約して試験に合格する通過率を高めます。我々の問題集は的中率が高くて、100%の合格率を保証します。我々の高質量のIBM C2210-923を利用すれば、君は一回で試験に合格できます。
TopExamは君にC2210-923の問題集を提供して、あなたの試験への復習にヘルプを提供して、君に難しい専門知識を楽に勉強させます。TopExamは君の試験への合格を期待しています。
IBM WebSphere Portal 8.0 Deployment and Administration 認定 C2210-923 試験問題:
1. When using the Manage Search portlet to configure Portal Search, which one of the following options allows the administrator to define if categorization and/or summarization of documents should be done?
A) Collection
B) Content service
C) Content source
D) Search scope
2. To implement a highly available end-to-end security solution for a production IBM WebSphere Portal environment, which of the following sets of components would be most useful?
A) Tivoli Access Manager, portal cluster, credential vault, network-attached storage devices
B) Tivoli Access Manager, load-balancing edge component, portal cluster, LDAP cluster and DB cluster
C) Netegrity SiteMinder, credential vault, dynamic cache, deployment manager hot standby
D) Tivoli Access Manager, Netegrity SiteMinder, WebSphere Information Integrator, LDAP cluster and DB cluster
3. All of the following statements are true regarding external authorization, except?
A) When administrators use the XML configuration interface (xmlaccess) to externalize or internalize access control for a resource, access control for all of its public child resources moves with it.
B) Private pages cannot be externalized.
C) If a user inherits access to a resource from a parent resource, the user will lose the inherited access when the resource is externalized.
D) When administrators use the Resource Permissions portlet to externalize or internalize access control for a resource, access control for all of its public child resources moves with it.
4. Which of the following statements most correctly describes when a session validation filter is called?
A) For every request before actions are triggered and the page is rendered.
B) Each time a new user session is created.
C) Each time an idle timeout of the session occurs.
D) Anytime a new session attribute is created.
5. Which of the following direct migration paths to IBM WebSphere Portal 8.0 are supported?
A) WebSphere Portal 5.1.0.x and 6.1.0.x.
B) WebSphere Portal 6.0.0.x and 7.0.0.x.
C) WebSphere Portal 6.1.5.x and 7.0.0.x.
D) All of the above.
質問と回答:
質問 # 1 正解: A | 質問 # 2 正解: B | 質問 # 3 正解: A | 質問 # 4 正解: A | 質問 # 5 正解: C |