livechat
期間限定特別サービス、15%割引キャンペーン実施中、02:23:56において終了。お得な割引コード:TOPJP2025
HACKER SAFEにより証明されたサイトは、99.9%以上のハッカー犯罪を防ぎます。
カート(0

Citrix 1Y0-A28 問題集

1Y0-A28

試験コード:1Y0-A28

試験名称:Implementing NetScaler 10 for Networking and Traffic Optimization

最近更新時間:2025-03-26

問題と解答:全123問

1Y0-A28 無料でデモをダウンロード:

PDF版 Demo ソフト版 Demo オンライン版 Demo

追加した商品:"PDF版"
価格: ¥6599 

無料問題集1Y0-A28 資格取得

質問 1:
Scenario: An engineer configures two NetScaler appliances in a high availability (HA) pair. As part of a monthly health check, the engineer attempts to log on to the second node of the HA pair and is unable to access the management IP Address. The engineer logs on to the first NetScaler node and verifies that HA is working and operational. What does the engineer need to do to resolve this problem?
A. Ensure that HA Route Monitors have been configured for the second node.
B. Add a SNIP for the Management IP Address of the second node.
C. Create an ACL to allow access to the NSIP of the second node.
D. Change the NSRoot password back to default then log on to the second node.
正解:C

質問 2:
Scenario: An engineer executes the following commands: add vlan 2 bind vlan 2 -ifnum 1/2 add ns ip 10.110.4.200 255.255.255.0 bind vlan 2 -IPAddress 10.110.4.200 255.255.255.0 What type of IP address has been added to the NetScaler?
A. VIP address
B. NSIP address
C. SNIP address
D. GSLB Site IP address
正解:C

質問 3:
Scenario: The NetScaler has been connected to two external networks provided by different Internet service providers(ISPs). Dynamic routing is not enabled.
Traffic is expected to use the first ISP (through the 10.50.1.1 router) if possible and the second, slower ISP (through the 10.51.1.1 router) only if the Primary ISP fails. Which two commands could the network engineer execute to configure the routes? (Choose two.)
A. add route 0.0.0.0 0.0.0.0 10.50.1.1 -cost 5 -monitor PING
B. add route 0.0.0.0 0.0.0.0 10.51.1.1 -cost 3 -monitor PING-DEFAULT
C. add route 0.0.0.0 0.0.0.0 10.51.1.1 -cost 10 -monitor arp
D. add route 0.0.0.0 0.0.0.0 10.50.1.1 -cost 15 -msr ENABLED
正解:A,C

質問 4:
A network engineer is investigating a recent failure of NetScaler high availability and confirms that some recent changes were made to the configuration. What is a likely cause of the failure?
A. The network command policy has been modified.
B. RPC node password changed on an appliance.
C. Load balancing virtual server marked DOWN.
D. SNIP has had management access removed.
正解:B

質問 5:
Scenario: A network engineer needs to implement high availability (HA) for a pair of NetScaler appliances.
The existing appliance was recently restarted and the new appliance has been rack mounted and turned on for several weeks waiting to be configured. The engineer needs
to create an HA pair, but is concerned that his original appliance will get erased when the HA pair is created. Which two tasks could the engineer do before the creation of the HA pair to ensure that the exiting unit stays the main appliance? (Choose two.)
A. Configure StaySecondary on the new node.
B. Create a Route Monitor to ensure proper synchronization.
C. Enable HA Sync before adding the second node.
D. Set StayPrimary on the existing node.
E. Ensure that INC mode is enabled during creation of HA Pair.
正解:A,D

質問 6:
Which two response codes and pages can be cached on the NetScaler using Integrated Caching? (Chose two.)
A. 500 Internal server error
B. 404 Not found pages
C. 400 Bad request
D. 401 Unauthorized
E. 302 Found pages
正解:B,E

質問 7:
Scenario: Company Inc. wants to tag incoming requests with a header that indicates which browser is being used on the connection. This helps the server keep track of the browsers after the NetScaler has delivered the connections to the back end. The engineer should create actions to___. (Choose the correct set of options to complete the sentence.)
A. responder; separate the client requests
B. rewrite; insert tags on the server response
C. responder; filter the browser type on the client header
D. rewrite; insert tags on the client header
正解:D

質問 8:
Scenario: A network engineer has created two selectors to use to populate a cache group in integrated caching. One selector, "Hit," will determine what to add to the group. The other, "Inval", will select what should be invalidated. Which command should the engineer run to create the cache group?
A. add cache contentgroup CacheGroup1 -hitSelector Hit -invalSelector Inval
B. set cache contentgroup CacheGroup1 - hitParams Hit -invalParam Inval -type HTTP
C. set cache contentgroup CacheGroup1 -hitSelector Hit - invalSelector Inval -type HTTP
D. add cache contentgroup CacheGroup1 -hitParams Hit -invalParam Inval
正解:A

1Y0-A28 関連試験
1Y0-A21 - Basic Administration for Citrix NetScaler 9.2
1Y0-A19J - Citrix XenDesktop 5 Administration (1Y0-A19日本語版)
1Y0-A24 - Citrix XenServer 5.6 Administration
1Y0-A26J - Citrix XenServer 6.0 Administration (1Y0-A26日本語版)
1Y0-A19 - Citrix XenDesktop 5 Administration
連絡方法  
 support@topexam.jp サポート

試用版をダウンロード

人気のベンダー
Apple
Avaya
CIW
FileMaker
Lotus
Lpi
OMG
SNIA
Symantec
XML Master
Zend-Technologies
The Open Group
H3C
3COM
ACI
すべてのベンダー
TopExam問題集を選ぶ理由は何でしょうか?
 品質保証TopExamは我々の専門家たちの努力によって、過去の試験のデータが分析されて、数年以来の研究を通して開発されて、多年の研究への整理で、的中率が高くて99%の通過率を保証することができます。
 一年間の無料アップデートTopExamは弊社の商品をご購入になったお客様に一年間の無料更新サービスを提供することができ、行き届いたアフターサービスを提供します。弊社は毎日更新の情況を検査していて、もし商品が更新されたら、お客様に最新版をお送りいたします。お客様はその一年でずっと最新版を持っているのを保証します。
 全額返金弊社の商品に自信を持っているから、失敗したら全額で返金することを保証します。弊社の商品でお客様は試験に合格できると信じていますとはいえ、不幸で試験に失敗する場合には、弊社はお客様の支払ったお金を全額で返金するのを承諾します。(全額返金)
 ご購入の前の試用TopExamは無料なサンプルを提供します。弊社の商品に疑問を持っているなら、無料サンプルを体験することができます。このサンプルの利用を通して、お客様は弊社の商品に自信を持って、安心で試験を準備することができます。
a