質問 1:Exhibit:

IBM 000-784 Exam
In order to support the client's requirement for FCoE with the 10Gb Virtual Fabric Ethernet LAN-on-motherboard (LOM) which optional feature must be included?
A. A second CPU that matches the first one installed
B. IBM Flex System Fabric EN4093 10Gb Scalable Switch (Upgrade 1)IBM Flex System Fabric EN4093 10Gb Scalable Switch (Upgrade 1)
C. IBM Flex System Fabric CN4093 Converged Scalable Switch (Upgrade 2)IBM Flex System Fabric CN4093 Converged Scalable Switch (Upgrade 2)
D. IBM Flex System Embedded 10Gb Virtual Fabric Upgrade
正解:D
質問 2:On a PureFlex system, how can the FSM be restored from a previous backup?
A. The FSM can be restored from a backup on the local hard drive, a supported USB device or a Secure FTP Server.
B. The FSM can only be restored from a backup on the local hard drive. This is the only location where a backup can be stored.
C. The FSM can only be restored on a non-configured FSM. The FSM must be reinstalled/reset and then the backup can be installed from thelocal hard drive.
D. The FSM cannot be backed up completely; only specific information like EAPs can be saved. It must be reinstalled and the startup wizard runagain.
正解:A
質問 3:A client wants to purchase a PureFlex solution. Their solution will require 24 ports per Power node to meet their I/O needs. With cost as a consideration, which node will meet the client requirements?
A. A 16-core p24L node with two each EN4093 and FC5022 switches
B. A 24-core p270 node with four CN4093 switches
C. A 32-core p460 node with four CN4093 switches
D. A 24-core p270 node with two each EN4093 and FC5022 switches
正解:C
質問 4:A sales team needed to complete a PureFlex proposal before they had the opportunity to sort out the details of networking connectivity with the client networking team. Therefore, they did not change the networking defaults from the configuration. What consequences might result from this approach?
A. The PureFlex system networking defaults should work well for the Ethernet connectivity but the Fibre Channel SAN connectivity must becarefully planned to ensure interoperability
B. The PureFlex system networking defaults are well thought out and will work well in most circumstances without changes
C. The PureFlex system will work, but performance may be inadequate without potentially expensive upgrades
D. The PureFlex system could be inoperable and require potentially expensive last-minute upgrades to get it operational
正解:D
質問 5:A client is using a Flex System with Storwize V7000. Recently performance problems were identified. They wonder if the addition of Solid State Drive (SSD) capacity in conjunction with the Easy Tier function could improve their system performance. Which of the following tools can be used to find out if this performance problem is solved by using SSD and Easy Tier?
A. Use the IBM Storage Tier Advisor Tool
B. Use Disk Magic with SSD and Easy Tier configuration
C. Use Capacity Magic with SSD and Easy Tier configuration
D. Use Tivoli Storage Productivity Center
正解:A
質問 6:In a Flex System solution, what is most likely to prevent the cloud enablement of PowerVM workloads when leveraging SmartCloud Entry?
A. Sub-capacity licensing for Oracle
B. Support for Oracle workloads
C. Compatibility with third party storage
D. Integration with Cisco networking
正解:C
質問 7:A client requires the following functions as part of their management of the PureFlex environment: Single sign-on (centralized user management) Secure boot: TPM and CRTM Intel TXT technology (Intel Xeon-based compute nodes) Signed firmware updates to ensure authenticity Secure communications Certificate authority and management Chassis and compute node detection Role-based access control Security policy management Which PureFlex management function is required to execute these tasks?
A. IBM Flex System Manager Advanced
B. IBM Fabric Manager
C. IBM Flex System Manager
D. IBM Chassis Management Module
正解:D
弊社は無料IBM 000-784サンプルを提供します
お客様は問題集を購入する時、問題集の質量を心配するかもしれませんが、我々はこのことを解決するために、お客様に無料000-784サンプルを提供いたします。そうすると、お客様は購入する前にサンプルをダウンロードしてやってみることができます。君はこの000-784問題集は自分に適するかどうか判断して購入を決めることができます。
000-784試験ツール:あなたの訓練に便利をもたらすために、あなたは自分のペースによって複数のパソコンで設置できます。
TopExamは君に000-784の問題集を提供して、あなたの試験への復習にヘルプを提供して、君に難しい専門知識を楽に勉強させます。TopExamは君の試験への合格を期待しています。
一年間の無料更新サービスを提供します
君が弊社のIBM 000-784をご購入になってから、我々の承諾する一年間の更新サービスが無料で得られています。弊社の専門家たちは毎日更新状態を検査していますから、この一年間、更新されたら、弊社は更新されたIBM 000-784をお客様のメールアドレスにお送りいたします。だから、お客様はいつもタイムリーに更新の通知を受けることができます。我々は購入した一年間でお客様がずっと最新版のIBM 000-784を持っていることを保証します。
安全的な支払方式を利用しています
Credit Cardは今まで全世界の一番安全の支払方式です。少数の手続きの費用かかる必要がありますとはいえ、保障があります。お客様の利益を保障するために、弊社の000-784問題集は全部Credit Cardで支払われることができます。
領収書について:社名入りの領収書が必要な場合、メールで社名に記入していただき送信してください。弊社はPDF版の領収書を提供いたします。
弊社のIBM 000-784を利用すれば試験に合格できます
弊社のIBM 000-784は専門家たちが長年の経験を通して最新のシラバスに従って研究し出した勉強資料です。弊社は000-784問題集の質問と答えが間違いないのを保証いたします。

この問題集は過去のデータから分析して作成されて、カバー率が高くて、受験者としてのあなたを助けて時間とお金を節約して試験に合格する通過率を高めます。我々の問題集は的中率が高くて、100%の合格率を保証します。我々の高質量のIBM 000-784を利用すれば、君は一回で試験に合格できます。
弊社は失敗したら全額で返金することを承諾します
我々は弊社の000-784問題集に自信を持っていますから、試験に失敗したら返金する承諾をします。我々のIBM 000-784を利用して君は試験に合格できると信じています。もし試験に失敗したら、我々は君の支払ったお金を君に全額で返して、君の試験の失敗する経済損失を減少します。
IBM PureFlex Technical Expert V1 認定 000-784 試験問題:
1. A client wishes to provide a Flex solution that compares to a standard Intelligent Cluster x3750 M4 servers running Windows Server 2008. The client asks for a Flex System compute node with similar processor capacity and scalability. Which node should be discussed with the prospect?
A) Flex node x222
B) Flex node x440
C) Flex node x240
D) Flex node x220
2. A cost conscious client wants to purchase a two POWER node PureFlex solution. Each node will have 16 cores, two AIX LPARs, and they need four ports of FCoE communications. A critical requirement is there can be no single point of failure. Which solution will meet all the client's requirements?
A) p270
B) p24L
C) p260
D) p460
3. Which I/O modules can support end-to-end FCoE between a compute node with a CN4054 10Gb Adapter (with the FCoE upgrade) and an IBM Flex System V7000 Storage Node?
A) Any IBM 10Gb Ethernet I/O module
B) Any IBM Fibre Channel I/O module
C) Only the CN4093
D) Only the EN4093R
4. 
The current phase of their modernization effort is focused on upgrading their servers. Which action best addresses the client's requirement?
A) Propose the x222 Flex nodes because they will provide the most cost effective solution
B) Arrange a visit to the closest IBM Briefing Center so they can see the latest releases of the compute nodes
C) Propose IBM's Flex nodes that support all appropriate connectivity options to connect to the existing storage
D) Find out what Cisco, HP, and Dell are bidding and build an IBM Flex solution to match them at lower costs
5. For comparing the x86 IBM Flex System offering with the Cisco UCS offering, a client wants to know how much energy the IBM Flex System will be consuming. The energy consumption based on label ratings is not sufficient. What tool would the technical expert use to determine this?
A) The IBM Power Configurator
B) The IBM System Planning Tool
C) The IBM Systems Energy Estimator Tool
D) The IBM Systems Workload Estimator
質問と回答:
質問 # 1 正解: B | 質問 # 2 正解: D | 質問 # 3 正解: C | 質問 # 4 正解: C | 質問 # 5 正解: A |